Schmalspur-Modell-Forum

Hallo!
Durch die Verwendung eines fertigen Industriefahrgestelles ist eine
gute Fahreigenschaft gegeben, auch weil ich keine Änderung der Drehgestelle mit der Stromabnahme durchgeführt habe. Zusätzlich ist ein
Radpaar mit Gummiring vorhanden.
Zum Vorbild: Ich habe die D7 bei der Zillertalbahn im Jahr 2000 aufgenommen. Sie hat die gleiche Farbgebung wie heute in Stainz!!
Leider kann ich kein Foto ins Forum stellen, da ich damals nur Dias
gemacht habe und ich keinen Scanner dafür habe.

My friend's mine in H0e:

Hello!

We tested the L45H on 193 mm radius, it seemed good. We put on a standard coupler. (Attachable with Roco wagons for example...)

Hi Elosieto!

You have showed this picture about the litte C50:

elosieto hat geschrieben:

I´d like to buy such a body without a motor or painting (H0e). How much is it?

Hello!

It is 20 Eur with cost of postage.

Hello!

The L45H's drive works very well, the coupler also works, we tested today in curves, on turnouts.

looks fine - the gear will reduce the speed, which is a good idea according to the big wheels...
regards,
peter

These are standard Halling wheels.

yeah, but the use different diameters at different models, and all of them ar of higher diameter than most of the often used n-scale chassis...
not as a critical argument, just as a fact - I once added halling-wheels to a roco-n-scale chassis, it really raced across the rails...
that´s what I was meaning....

regards
peter

Yes I understand, but these parts also used in a H0e engine at Mr. Halling.

Hello!



Do you know where can I buy some coupler for air system (brake) in H0? These parts are on the front panel, there are 4 coupler red and yellow.

(At Hungary it is called Ackermann switcher)

Thanks

This is:

Test of hinges and latches, just put up to the body...

Sorry for quality the pic was made by phone.

Some more pics, just few days...

Hello, is it possible to get one of the last MK48 resin bodies?

Hello!

Yes it is, the first pieces will be ready at next week, the chassis and many small parts are being produced now, the upper part is finished in few days.

Krisztian

Hello!

This is the demo of the boogie mask, the better and latest version is being in the rubber now...

Hello!

The engine is ready, the first parts are ready, so we calculated the prices:

kit/bausatz (with drive/mit antrieb): 100 Euro
ready to run engine/fertigmodell: 155 Euro

The engines will be painted with this colors:

Hello!

Some new pics from yesterday.

looks very promising!
keep on going that way.

regards,
peter